MSM-6226G

产品检索:

当前位置: 首页 > 产品 > 网络及通信类产品 > 工业网络交换机> MSM-6226G

MSM-6226G

Enlarge image

20-Port 10/100/1000 Base-T + 4 Combo 100/1000 TP/SFP Port + 2 SFP Port L2 Managed Switch

Datasheet (PDF)

产品特征
	IEEE 802.3ab 1000BASE-T Gigabit Ethernet L2+ features provide better manageability, security, QoS, and performance IPv6 and s-Flow supports Supports IGMPv3 snooping and IGMP Proxy IEEE 802.3z Gigabit Ethernet Dual speed SFPs for FE or GbE fiber uplink 802.3az Energy Efficient Ethernet standard Port Mirroring helps supervisor monitoring network

产品规格

Technology
Standards	Port Mirroring helps supervisor monitoring network
	IEEE 802.1Q tag-based VLAN for performance
	IEEE 802.1X Access Control improve network security
	IEEE 802.1D Compatible, IEEE802.1w Rapid Spanning Tree & IEEE802.1s Multiple Spanning Tree
	IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper)
	IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3
	Unknown Unicast/Broadcast/Multicast storm control
	IP-MAC-Port binding for LAN security
	QCL Based on Application traffic for QoS and rate limitation management
	Supports IGMPv3 snooping and IGMP Proxy
	Supports DHCP snooping (DHCP option 82)
	ACL Based on Ethernet Type/ARP/IPv4 for packets permit or deny, rate limitation and port copy
	Supports "power saving" for Green Ethernet requirement
	Supports LLDP (Link Layer Discovery Protocol) provides a standards-based method for enabling switches to advertise themselves.
MAC Addresses	8 K
Jumbo frames	Frame sizes up to 9KB supported on Gigabit interfaces
Processing Type	Store & forward
Memory Bandwidth	52 Gbps
Frame Buffer Memory	4 Mbits
Protocol	VLAN, QoS, Port Trunk, SMTP, TELNET, SNMP, IGMP, IEEE802.1X, LLDP
Interface
RJ-45 Ports	20-port 10/100/1000 Base-TX auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
UTP/SFP Combo	4-port combo 100/1000 BAST-T/SFP slots
SFP	2-port 100/1000 Mbps SFP Fiber Module slots
LED Indicators	POWER, TP Port LED , SFP Port LED
Ethernet Isolation	2 K VDC Isolation
Serial Port	RS-232 (TxD, RxD and GND); Non-isolated
Frame Ground for EMS Protection	EMS Requirements: IEC-61000-4-2, IEC-61000-4-3, IEC-61000-4-4, IEC-61000-4-5, IEC-61000-4-6, IEC-61000-4-8, IEC-61000-4-11
Power
Input Voltage Range	+100 VAC ~ +240 VAC
Power Consumption	16 W
Frame Ground for EMS Protection	Yes
Mechanical
Casing	Metal
Environmental Rating	IP20
Dimensions (W x L x H )	442 mm x 170 mm x 44 mm
Installation	Wall mounting, 19'' rackmountable, brackets included
Environmental
Operating Temperature	0 °C ~ +50 °C
Environmental Rating	-20 °C ~ +70 °C
Ambient Relative Humidity	10% ~ 90% RH, non-condensing

订购信息
	MSM-6226G CR 20-port 10/100/1000Base-T + 4 TP/(100/1G) SFP Combo + 2 (100/1G) SFP L2 Plus Managed Switch (9-Pin Female D-sub & RJ-45 cable, and Power Cord)